Waterproof ip67 12 volt 200W LED transformer with CE ETL listed 3 years warranty
SMT-012-200VW is 12 volt LED transformer. Waterproof IP67 verison. 100-265Vac PF>0.95 Efficienc y>0.88，Can be matched with Maxlite brand MP-SM28UT3-40BEM2 model。
|
Features of 12 volt LED transformer
● IP67 for indoor or outdoor installations
● Protections:Short circuit/Overload/Over temperature
● Cooling by free air convection
● 100% full load burn-in test
● Suitable for LED lighting
● Products through ETL,CE,RoHS Certification ●3 years warranty |
Specification of 12 volt LED transformer
1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
SPECIFICAION
MODEL
SMT-012-200VW
SMT-024-200VW
SMT-036-200VW
OUTPUT
DC VOLTAGE
12V
24V
36V
RATED CURRENT
16.67A
8.33A
5.55A
CURRENT RANGE
0~16.67A
0~8.33A
0~5.55A
RATED POWER
200W
200W
150W
RIPPLE&NOISE(max)
150mV
150mV
150mV
VOLTAGE TOLERANCE
±0.5V
±0.5V
±0.5V
SETUP RISE TIME
80ms/110VAC, 220VAC
HOLD UP TIME(Typ.)
60ms/110VAC, 220VAC
INPUT
VOLTAGE RANGE
90~265VAC
FREQUENCY RANGE
50~60Hz
POWER FACTOR(Typ.)
>0.95@110VAC ; >0.98@220VAC
EFFICIENCY(Typ.)
﹥91%
AC CURRENT(Typ.)
2.10A@110VAC; 1.01A@220VAC
INRUSH CURRENT (Typ.)
COLD START 50A/110VAC, 220VAC
PROTECTION
Short circuit
Protection type:recovers automatically after condition is removed
Overload
overload protected@145-160% above peak rating
Over temperature
Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT
WORKING TEMP.
-30~+55℃ (Refer to output load derating curve)
WORKING HUMIDITY
20~99% RH non-condensing(Waterproof)
STORAGE TEMP.,HUMIDITY
-40~+80℃,10~99%RH
SAFETY&EMC
SAFETY STANDARDS
CE ETL Mark(EMC,LVD),IP67
WITHSTAND VOLTAGE
I/P-O/P:3.0KVAC IP-GND:3.0KVAC
EMC Test Standards
EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE
label
FAQ
What is a constant voltage LED driver?
What is a Constant Voltage LED Driver? Constant Voltage drivers are designated for a single direct current (DC) output voltage, usually 12VDC or 24VDC. An LED light rated for a constant voltage requires a consistent amount of output voltage to ensure a proper operation.
